EMTEST-Simulator for conducted, common-mode disturbances (Model:CWS 500N4)

By
-
5
454
Vui lòng liên hệ với chúng tôi– chúng tôi sẽ liên hệ lại với khách hàng bằng điện thoại hoặc email.
Lưu ý: Tham khảo ý kiến của nhân viên INO sẽ giúp bạn tiết kiệm được thời gian và chi phí khi cần mua sắm. ​​Với sự tư vấn của chúng tôi, bạn sẽ không gặp khó khăn khi tìm hiểu về đặc tính của sản phẩm cần mua.

Highlights

  • Most compact equipment for common-mode disturbances as per IEC 61000-4-16
  • Built-in LF signal generator and LF amplifier
  • Sweep mode capability 10Hz to 165kHz
  • Built-in rectifier module for DC testing
  • Option for Electricity Meter testing acc IEC 61000-4-19 Annex C
  • Built-in voltage meter (rms values)
  • Test capabilities for DC, 16 2/3Hz, 50Hz and 60Hz in continuous mode and short term mode
  • USB-Interface
  • Built-in semiconductor power switch

Application

CWS 500N4 – Testing for immunity to conducted, common-mode disturbances

The CWS 500N4 is the state-of-the-art solution in a compact single-box design to test for immunity to conducted, common mode disturbances in the frequency range 0Hz (DC) to 165kHz. Such test requirements are specified in IEC 61000-4-16 and cover continuous mode testing as well as short term testing with DC, 16 2/3Hz, 50Hz and 60Hz with 4 test levels each plus a sweep mode from 10Hz to 165kHz.
Additionally, the CWS 500N4 can be used for testing electricity metering equipment as per prTR 50579 and Draft standard IEC 61000-4-19, Annex C.
Benefits

Conducted common mode testing out of one single box – Easy, fast and reliable

Test levelsZoom
The CWS 500N4 consists of all the necessary parts to perform full-compliant tests as per IEC 61000-4-16 including the signal generator, the LF amplifier, a DC rectifier module, a semiconductor power switch and the rms measurement of voltage and current.

The CWS 500N4 is able to generate all continuous mode test levels up to 30V (DC, 16 2/3Hz, 50Hz and 60Hz) and the frequency sweep 15Hz to 150kHz without any additional external voltage source.
In order to perform the short-term mode tests up to 300V (DC, 50Hz or 60Hz, depending on the mains line frequency) the optional MV 2606N2.2 is required. 
If tests need to be done with 16 2/3Hz or at frequencies other than the mains line frequency the optional programmable AC voltage source ACS 500N2.2 is needed. 

For remote control via icd.control software both a GPIB and USB interface are available. icd.control software supports the various test routines, can automatically generate a test report including all test data and offers multiple interruption functions.
Manually operated the user is offered the Quick Start test routine for the easy and efficient testing of specific test points without software.

Lưu ý: Nếu một thiết bị nào đó không được liệt kê ở đây, điều đó không có nghĩa rằng chúng tôi không hỗ trợ được bạn về thiết bị đó. Hãy liên hệ với chúng tôi để biết danh sách đầy đủ về thiết bị mà chúng tôi có thể hỗ trợ và cung cấp.
INO: Bán, Báo giá, tư vấn mua sắm và cung cấp, tư vấn sản phẩm thay thế; tương đương, hướng dẫn sử dụng, giá…VNĐ, …USD info@ino.com.vn | Tel: (+84) 028 73000184 | EMTEST-Simulator for conducted, common-mode disturbances (Model:CWS 500N4).

RELATED ARTICLESMORE FROM AUTHOR

5 COMMENTS

  1. … [Trackback]

    […] Read More here to that Topic: ino.com.vn/khac-do-luong-kiem-tra/emtest-simulator-for-conducted-common-mode-disturbances-modelcws-500n4/ […]

  2. … [Trackback]

    […] Read More here on that Topic: ino.com.vn/khac-do-luong-kiem-tra/emtest-simulator-for-conducted-common-mode-disturbances-modelcws-500n4/ […]

  5. … [Trackback]

    […] Information on that Topic: ino.com.vn/khac-do-luong-kiem-tra/emtest-simulator-for-conducted-common-mode-disturbances-modelcws-500n4/ […]