Two internal electrochemical sensors read the Oxygen (O2) and carbonic monoxide (CO) gas concentration.
The gas temperature and air temperature are used in connection with the gas analysis to calculate the efficiency, excess air, and CO2 concentration.
A 10 gas parameters programmable table is used for calculations approved in accordance with DIN33962.
External sensors are available for auxiliary measurements: ambient CO concentration (for operator’s safety), gas network leakage procedure (pressure decay method) and natural gas leakage detector (sniffer).
The instrument is completed with a differential pressure (draught) sensor, an internal printer, an internal memory for storing data and a USB serial interface for configuration and data transfer from and to a PC.
Draft measurement is possible using the internal pressure sensor and the Eurotron special gas sample probe.
- The optional internal printer is impact type and the generated document is very legible and has a long time duration.
- The internal standard memory may store up to 250 complete gas analysis divided by Tag.
- The UniGas has a standard IR serial interface for external HP 82240B thermal wireless printer.
- The optional USB cable and a configuration PC software are available to configure the analyser.
… [Trackback]
[…] Info on that Topic: ino.com.vn/khac-do-luong-kiem-tra/eurotron-2-sensors-gas-analysermodel-unigas-2000/ […]
… [Trackback]
[…] There you will find 57043 additional Info on that Topic: ino.com.vn/khac-do-luong-kiem-tra/eurotron-2-sensors-gas-analysermodel-unigas-2000/ […]