HWg-SMS-GW2 is a gateway that enables HW group products to send text message alarms. Send SMS alarms from all HW group products in your LAN. No software needed, works over a LAN at the Box-2-Box (Peer-to-Peer) level. Save administration costs and effort – use only a single SIM for all your devices.
IP sensors and other HW group products in the same LAN can send SMS alerts over HWg-SMS-GW LAN alert gateway. The alarm recipient's phone number is configured in the IP sensor where the alarm originates. HWg-SMS-GW can be also used to send text messages from HW group software applications (HWg-Trigger, HWg-DCD and more). Simplify your system by using a single SIM card to send SMS alarms from all HW group products. However, we strongly discourage the use of pre-paid SIMs, it is recommended to use a regular post-paid plan.
|
![]() Front panel Rear panel |
Benefits
- No software needed to send text message alerts, Box-2-Box mode works peer-to-peer over the LAN
- Web-based configuration
- Recipient's phone number is configured in the IP sensor device (software). One HWg-SMS-GW can send messages to dozens of different recipients.
- Supports a “SMS + Ring” function that dials a call to the sms alert recipient's number and lets it ring for a short time
- External antenna simplifies usage in a data center
- Quad-Band GSM modem works with GSM coverage anywhere in the world
- Examples for programmers on using the product are available in the HWg-SDK (Borland C++, MS Visual C, VB, C#, PHP, JAVA and more)
Basic features
- Ethernet: RJ45 (10BASE-T)
- Configuration: WEB interface
- GSM antenna: External 3m cable, SMA
- GSM standard: Quad-Band 850 / 900 / 1800 / 1900 MHz
- Can be used to send SMS from:
- Can be used to send SMS from software and services:
- HWg-Trigger software
- HWg-DCD software
- Nagios monitoring software (Netways: notify-poseidon-sms.pl)
- www.SensDesk.com online service
- Communication protocol: netGSM (HTTP)
- Outgoing SMS queue size: 20 messages
- Support for programmers: HWg-SDK
Sending SMS alerts from Poseidon units over the LAN
- The Box-2-Box mode (peer-to-peer over LAN) is used, no special software is needed
- HWg-SMS-GW contains a SIM card and sends text message alarms on behalf of three different IP sensor units
- Recipients' phone numbers (Mr. Blue, Mr. Yellow and Mr. Green) are configured in each IP sensor unit
- Together with the text message, it is also possible to call the recipient to let the phone ring
Product monitoring with HWg-Trigger
- HWg-Trigger monitors the function of other products (Poseidon 3266, HWg-STE Push, Damocles 1208, Poseidon 4002) over LAN
- If a product is inaccessible or fails, a SMS alert is sent using HWg-SMS-GW in the same LAN
- Recipients' phone numbers (Mr. Purple, Mr. Green) are configured in HWg-Trigger
- HWg-SMS-GW contains a SIM card and sends text message alarms to different phone numbers
Alerts to events: HWg-Trigger
HWg-Trigger software allows to react to events. For instance, “If the device at the address X does not work, do Y”. The software runs on Windows in the background and keeps checking the configured conditions.
- Monitors IP sensors in the LAN: sends a SMS if a sensor is disconnected
- Monitors IP sensors in the LAN: sends a SMS in case of device failure
- Monitors IP sensors in the LAN: sends a SMS in case of sensor value out of Safe Range
- 30-day trial version is free of charge
- Runs in the background as a Windows service (NT service)
Nagios SMS alerts
- Nagios NMS monitors other devices using SNMP
- In the Nagios system, a plugin enables SMS alerts over HWg-SMS-GW gateway
- The plugin configuration includes the phone numbers of text message alert recipients
- For details about obtaining and using the Nagios plugin, see the product manual
- The plugin was created in cooperation with Netways (MonitoringExchange: notify-poseidon-sms.pl)
Sending SMS from online portal SensDesk.com
- LAN & GSM sensors (HWg-STE Plus & Ares 12) sending data to the online portal SensDesk.com
- Your user account contains IP address or DNS where is located your HWg-SMS-GW2 (public address required).
- In each sensor configuration on the SensDesk.com portal you can define the alert phone number of the SMS recipient. >> SensDesk.com
Frequently Asked Questions
- How many SMS recipients can be configured?
In the Box-2-Box mode, 2 different numbers can be configured for each Poseidon unit.
In the HWg-Trigger utility, 3 numbers can be set for each condition. The number of conditions is limited to 90. - Can I use HWg-SMS-GW to send text messages from my own software?
Yes, communication examples in various programming languages are available in the HWg-SDK. - Can I send SMS alerts from the SensDesk.com service?
Yes. However, the HWg-SMS-GW must be accessible at a public IP address so that the SensDesk.com online service can reach it. - Where can I find the prices of your devices?
Ask our distributors, or request a quote directly from us using the form at this page.
How to order
Order item | |
HWg-SMS-GW2 | HWg-SMS Gateway start set GSM SMS gateway for sending text messages from other HW group devices over the LAN. Includes an internal GSM modem, an external antenna with 3m cable, a power adapter and a CD. |
HWg-SMS-GW2 plain | HWg-SMS Gateway unit only – photo GSM gateway unit. No accessories included (no power adapter, no antenna etc.) |
Rack mounting brackets 19" | Brackets and accessories for mounting a Poseidon2 4xxx or HWg-SMS-GW2 unit into a 19" cabinet. – item photo |
Rack Shelf 1U ![]() |
Profile and accessories for two or more devices installed to one 19” 1U cabinet position. Installation manual / product photo |
Mount plate D | Bracket for attaching HWg-Ares, Poseidon2 3266/68 or other products to a wall. – item photo |
HWg-SMS-GW | HWg-SMS Gateway start set – Obsolete model GSM SMS gateway for sending text messages from other HW group devices over the LAN. Includes an internal GSM modem, an external antenna with 3m cable, a power adapter and a CD. |
HWg-SMS-GW plain | HWg-SMS Gateway unit only – Obsolete model GSM gateway unit. No accessories included (no power adapter, no antenna etc.) |
Resource & Download
HWg-SMS-GW2
HWg-SMS-GW manual
Configuration: UDP Config
- Latest firmware: Firmware v.1.0.3
… [Trackback]
[…] Information on that Topic: ino.com.vn/khac-do-luong-kiem-tra/hwg-gsm-gateway-for-sending-sms-alarms-from-other-products-modelhwg-sms-gw2/ […]
… [Trackback]
[…] There you can find 90634 additional Information to that Topic: ino.com.vn/khac-do-luong-kiem-tra/hwg-gsm-gateway-for-sending-sms-alarms-from-other-products-modelhwg-sms-gw2/ […]
… [Trackback]
[…] Find More on on that Topic: ino.com.vn/khac-do-luong-kiem-tra/hwg-gsm-gateway-for-sending-sms-alarms-from-other-products-modelhwg-sms-gw2/ […]
… [Trackback]
[…] Find More Information here on that Topic: ino.com.vn/khac-do-luong-kiem-tra/hwg-gsm-gateway-for-sending-sms-alarms-from-other-products-modelhwg-sms-gw2/ […]