IVIUM – Electrochemical Interface & Impedance Analyser (Model:IviumStat)

By
-
7
547
Vui lòng liên hệ với chúng tôi– chúng tôi sẽ liên hệ lại với khách hàng bằng điện thoại hoặc email.
Lưu ý: Tham khảo ý kiến của nhân viên INO sẽ giúp bạn tiết kiệm được thời gian và chi phí khi cần mua sắm. ​​Với sự tư vấn của chúng tôi, bạn sẽ không gặp khó khăn khi tìm hiểu về đặc tính của sản phẩm cần mua.

 Key features:

• Wide application range:
The IviumStat is well suited for applications requiring a wide dynamic range, such as battery testing, corrosion measurements and electrochemical research applications. It has a high power of ±5A and low current ranges, down to 1pA full scale.
• Complete solution:
The IviumStat offers a complete package, all the standard Electrochemical techniques are included. The IviumStat also has an integrated  high-performance Frequency Response Analyser for EIS measurements from 10µHz to 8MHz. All measurement and dataprocessing software is included (for Windows based pc’s).
• Safety:
The compliance (maximum current or potential) of the instrument can be defined by the operator. Thus valuable samples may be protected, and unsafe situations prevented.
• Automation:
Multiple analog and digital input & output ports are available for monitoring & control of peripheral equipment. This functionality is fully integrated in the software.
• Expandability:
The IviumStat can be expanded with a wide variety of options and modules, including a Bipotentiostat, True Linear Scan generator, various power boosters, multiplexer and FastScan.
• Hardware: 
– Automatic current range selection: 1pA to 10A/1mV to 10V (50V)
– Automatic variable noise filter and potentiostat/galvanostat stability settings 
– Simultaneous acquisition of current/potential and up to 8 peripheral analog signals 
– Real time data display up to 500 pnts/s. Acquisition up to 100,000 pnts/s is stored in instrument memory
– Applicable scanrates: 1µV/s to 10,000 V/s 
– Minimum interval time/resolution: 10µs
– Result optimalisation by automated tuned filters, gain amplifiers and dc-subtraction
 
Software:
The IviumStat is controlled via Ivium's own IviumSoft. This versatile, yet intuitive software, allows instrument control, data management and analysis, peripheral instrument control, etc. IviumSoft can also interface with and be controlled from LabVIEWTM, C++, Delphi, etc. A full suite of IviumSoft is standard included with each instrument.
System Performance:  IviumStat
Current compliance ±5 A
Maximum output Voltage ± 10V below 1A and ± 8V up to 5A
Potentiostat Bandwidth 8 MHz for small signals, 300kHz for large signals
Stability settings High Speed, Standard, and High Stability
Programmable response filter 1MHz , 100kHz , 10kHz , 1kHz , 10Hz
Signal acquisition dual channel 16 bit ADC, 100.000 samples/sec
Potentiostat:
Applied potential range ±10 V, with 0.33mV resolution
Applied potential accuracy 0.2%, or 2mV
Current ranges ±10nA to ±10A in 10 steps
High sensitivity current ranges ±1pA, ±10pA, ±100pA, ±1nA
Measured current resolution 0.015% of current range, minimum 0.15fA
Galvanostat
Applied current resolution 0.033% of applied current range
Applied current accuracy 0.2%
Potential ranges ±1mV, ±10mV, ±100mV, ±1V, ±10V
Measured potential resolution 0.003% of potential range, minimum 40nV
Impedance Analyser
Frequency range 10µHz to 8MHz
Amplitude 0.015mV to 1.0V, or 0.03% to 100% of current range
DC offset 16 bit dc offset subtraction, and 2 dc-decoupling filters
Dynamic range 12nV to 10V, and 0.05fA to 5A
Electrometer
Input impedance >1000 Gohm //<8pF
Input bias current <10 pA
Bandwidth >16 MHz
Special functions
Ohmic drop compensation 2 V/current range, 16 bits resolution
Safety features automatic disconnect on internal/external exceptions
Peripheral connections
8 Analog in, and 2 analog out 0 to +4V, 16 bits resolution
2 Digital inputs, and 3 Digital outputs 0 to +5V
I-out, and E-out analog monitor for cell current and potential
AC-out ±0.5V sinewave 10µHz-8MHz with variable attenuation
Channel-X, and Channel-Y inputs ±4V: to record impedance from peripheral devices
Environment
Power requirements 100-240V, 47-63Hz, 150VA
Interfacing USB 1.1, 2.0 and 3 compliant
Size w x d x h = 26 x 33 x 12 cm
Weight  4.0 kg
PC requirements Windows XP/Vista/7/8, with free USB port

Resource & Download

 
Lưu ý: Nếu một thiết bị nào đó không được liệt kê ở đây, điều đó không có nghĩa rằng chúng tôi không hỗ trợ được bạn về thiết bị đó. Hãy liên hệ với chúng tôi để biết danh sách đầy đủ về thiết bị mà chúng tôi có thể hỗ trợ và cung cấp.
INO: Bán, Báo giá, tư vấn mua sắm và cung cấp, tư vấn sản phẩm thay thế; tương đương, hướng dẫn sử dụng, giá…VNĐ, …USD info@ino.com.vn | Tel: (+84) 028 73000184 | IVIUM – Electrochemical Interface & Impedance Analyser (Model:IviumStat) .

RELATED ARTICLESMORE FROM AUTHOR

7 COMMENTS

  6. … [Trackback]

    […] Read More Info here to that Topic: ino.com.vn/khac-do-luong-kiem-tra/ivium-electrochemical-interface-impedance-analyser-modeliviumstat/ […]