Anritsu-Analog Signal Generator MG3740A(Model:MG3740A)

Features

• Analog Signal Generator supporting frequencies of 100 kHz to 2.7/4/6 GHz
• High-Purity Signal Source for Testing Analog Radio
• Built-in AM/FM/ΦM/Pulse Modulation Function [Standard]
• Two RF outputs using Dual-RF [Option]
• Expansion to Narrowband Digital Modulation Signal Generator [Option]

Description

The MG3740A Analog Signal Generator has excellent RF specifications, including SSB Phase Noise, output level, etc., and versatile modulation functions (AM/FM/ΦM/Pulse). The MG3740A is the ideal solution for high-purity signal source for testing analog radio Rx characteristics. Moreover, adding the digital modulation option supports generation of narrowband digital modulation signals.
Supports Narrowband Digital as well as CW and Analog Modulations !

■ Main Performance and Specifications

Basic Performance

• Frequency Range: 100 kHz to 2.7/4/6 GHz [1stRF Opt-032/034/036]
                              100 kHz to 2.7/4/6 GHz [2ndRF Opt-062/064/066]
• SSB Phase Noise: <-140 dBc/Hz nominal (100 MHz, 20 kHz offset, CW)
                              <-131 dBc/Hz typ. (1 GHz, 20 kHz offset)
• Level setting range: -110 to +17 dBm [Standard]
                              -144 to +17 dBm [Opt-042/072]
• High Power Output: +23 dBm (CW, 400 MHz to 3 GHz) [Opt-041/071]
• Switching Speed: <600 µs (frequency/amplitude, List/Sweep mode)
• Built-in AM/FM/ΦM/Pulse Modulation Function [Standard]

Expansion Options

• Adding additional analog modulation input [Opt-050/080]
          Adding additional analog modulation input options extends to two internal modulation sources (AM/FM/ΦM) and
          one external modulation source supporting simultaneous two-signal modulation.
• Two independent RF outputs using Dual-RF [Option]
          Supports "Wanted + Interference wave for Rx characteristics tests", "Amp intermodulation characteristics evaluation",
          and "RF/LO signal source for Mixer evaluations".
• USB Power Sensor (sold separately)
          Supports connection of two USB power sensors max.
• Expansion to Narrowband Digital Modulation Signal Generator [Opt-020]
  Adding the digital modulation function [Opt-020] supports generation of narrowband digital modulation signals.
  • RF Modulation Bandwidth : 2 MHz
  • Waveform generation software: IQproducer (License sold separately)
            TDMA IQproducer / Fading IQproducer
• BER Measurement Function [Opt-021]
          Input bit rate: 100 bps to 40 Mbps

Communications Interfaces

• Standard 1000Base-T, GPIB, and USB interfaces
• Built-in SCPI, MG3700A/MS269xA/MS2830A/MG364xA compatibility modes

   * IQproducer™ is a registered trademark of Anritsu Corporation.
   * Other company, product, service names, etc., are brands, registered trademarks, etc., of their respective owners.

Specifications

Options