EDL-Temperature Controller (Model: MX Series)

The MX series of temperature controllers are totally self-contained pre-wired systems that incorporate the FUJI PXR Series Controllers. There is no need for relays, circuit breakers, or power switches. All that is needed is an outlet with 120 VAC or 240 VAC power. The MX Controllers are efficient, convenient, and portable.

The MX Temperature Controller is designed with safety in mind. The on/off switch features a built in circuit breaker to protect process components if an overload occurs. If an input sensor should break, the automatic sensor break protection will detect the fault and shut down the process before damage occurs. The MX comes pre-wired for your specific sensor. Standard thermocouple sensors J, K, R, B, S, T, E, N are supported, as are 3 wire RTD sensors. Thermocouple sensors with 4 – 20 mA and 1- 5 VDC outputs are also available.  An optional 12, 15 or 24 VDC source is available to power external sensors such as Temperature Transmitters or Infrared Sensors. The FUJI PXR controllers use a patented Fuzzy Logic Algorithm with PID Autotune. The controller “learns your process” using the PID parameters as a starting point for all decisions made by the controller. Your process will reach its set point in the shortest time possible while virtually eliminating overshoot.  If the process should experience a disturbance the controller correctively reacts to insure the process maintains a stable temperature.  In addition, they can be programmed for 16 Ramp and Soak segments or two 8 segment patterns.

• Controls temperatures from ambient to maximum sensor range
• Selectable resolution
• Readout available In °C or °F
• Patented fuzzy logic with PID Autotune
• 16 segment ramp/soak programming
• Accepts thermocouple types J, K, R, B, S, T, E, N,
    RTD type, PT100, 4-20mA, & 1 – 5 VDC inputs
• Available with either dual or single channels
• 120 or 240VAC – 15 or 20 amp models
• 1-year warranty

 

Ordering Information

In order to determine your part number refer to the chart below. The letters and numbers highlighted in red create the part number. Read from left to right in the column rows to create the part number (ex. MX). Click here for additional ordering information.

*Dual Zone 15 Amp controller requires 20 Amp service
**Dual Zone 10 Amp controller requires 30 Amp service