Vui lòng liên hệ với chúng tôi– chúng tôi sẽ liên hệ lại với khách hàng bằng điện thoại hoặc email.
Lưu ý: Tham khảo ý kiến của nhân viên INO sẽ giúp bạn tiết kiệm được thời gian và chi phí khi cần mua sắm. Với sự tư vấn của chúng tôi, bạn sẽ không gặp khó khăn khi tìm hiểu về đặc tính của sản phẩm cần mua.
Key Facts
- Frequency options from 9 kHz to 3.2 GHz/6 GHz
- Optional baseband generator with realtime coder and arbitrary waveform generator for maximum flexibility
- Optional ARB-only baseband generators as cost-saving alternatives
- Support of 3GPP LTE FDD and TDD, 3GPP FDD/HSPA/HSPA+, GSM/EDGE/EDGE Evolution, TD-SCDMA, WLAN, WiMAX™ and all other important digital standards
- Fully fledged GNSS simulator with GPS, Glonass and Galileo
- RF bandwidth of up to 160 MHz with internal baseband generator
- I/Q modulator with 528 MHz RF bandwidth
- Optimized for high production throughput
- Prepared for aerospace and defense applications
- Low cost of ownership due to simple service concept
Brief Description
The R&S®SMBV100A offers excellent RF performance along with very high output level and short setting times. At the same time, the R&S®SMBV100A can be equipped with an internal baseband generator to allow generation of a number of digital standards (e.g.LTE, LTE-Advanced, IEEE802.11ac, GNSS). The wide frequency range from 9 kHz to 6 GHz covers all of the important bands for digital modulation.
Specifications
| Frequency | ||
| Range | R&S®SMBV-B103 | |
| CW mode | 9 kHz to 3.2 GHz | |
| I/Q mode | 1 MHz to 3.2 GHz | |
| R&S®SMBV-B106 | ||
| CW mode | 9 kHz to 6 GHz | |
| I/Q mode | 1 MHz to 6 GHz | |
| Setting time | SCPI mode, ALC state ON, CW mode | <3 ms |
| SCPI mode, ALC state ON, I/Q mode | <5 ms | |
| SCPI mode, ALC state Table | <2.5 ms | |
| SCPI mode, ALC state S&H | <7 ms | |
| List mode | <1 ms |
| Level | ||
| Maximum output power | 1 MHz < f = 6 GHz | >+18 dBm (PEP) |
| Absolute level error | 200 kHz < f = 3 GHz | <0.5 dB |
| Additional level error with ALC OFF, S&H | This mode is used with I/Q modulation and pulse modulation. | <0.25 dB |
| Output impedance VSWR in 50 Ω system | 200 kHz < f = 6 GHz | <1.8 |
| Setting time | SCPI mode, ALC state ON, CW mode | <2.5 ms |
| SCPI mode, ALC state ON, I/Q mode | <5 ms | |
| SCPI mode, ALC state Table | <2.5 ms | |
| SCPI mode, ALC state S&H | <7 ms | |
| List mode | <1 ms | |
| Reverse power | 1 MHz < f = 1 GHz | 50 W |
| 1 GHz < f = 2 GHz | 25 W | |
| 2 GHz < f = 6 GHz | 10 W |
| Spectral purity | ||
| Harmonics | f > 1 MHz; CW, level = 8 dBm | <–30 dBc |
| Nonharmonics | CW, level > –10 dBm, >10 kHz carrier offset, f = 1500 MHz | <–70 dBc (<–84 dBc typ.) |
| SSB phase noise | 20 kHz carrier offset, 1 Hz measurement bandwidth, CW | |
| f = 100 MHz | <–141 dBc (–147 dBc typ.) |
|
| f = 1 GHz | <–122 dBc (–127 dBc typ.) |
|
| f = 6 GHz | <–106 dBc (–112 dBc typ.) |
|
| Wideband noise | attenuator mode AUTO for level > 5 dBm, >10 MHz carrier offset, 1 Hz measurement bandwidth, CW | <–142 dBc |
| Supported analog modulation modes | ||
| Amplitude modulation | standard | |
| Frequency/phase modulation | standard | |
| Maximum FM deviation | f > 3 GHz | 16 MHz |
| Maximum φM | f > 3 GHz | 160 rad |
| Pulse modulation | optional, with R&S®SMBV-K22 |
|
| On/off ratio | >80 dB | |
| Rise/fall time | 10 % to 90 % of RF amplitude | <20 ns, 4 ns (typ.) |
| Minimum pulse width | using the optional R&S®SMBV-K23 pulse generator |
10 ns |
| I/Q modulation | ||
| Supported systems (with additional options) |
R&S®SMBV-B10 baseband generator required | GSM/EDGE/EDGE evolution, 3GPP FDD incl. HSPA/HSPA+,TD-SCDMA, CDMA2000®, 1×EV-DO, EUTRA/ LTE, WiMAX IEEE 802.16-2004, Cor1-2005, 802.16e-2005 and 802.16Rev2/D3 , WLAN IEEE 802.11a/b/g/n/ac, NFC A/B/F, Bluetooth®, GPS, Glonass, Galileo, HD Radio™3), XM Radio, Sirius Radio, FM Stereo / RDS, DAB / T-DMB, DVB-H/DVB-T, Tetra Release 2, multicarrier CW |
| Realtime custom digital modulation | R&S®SMBV-B10 baseband generator required | ASK, FSK, BPSK, QPSK, QPSK 45° offset, OQPSK, p/4-QPSK, p/2-DBPSK, p/4-DQPSK, p/8-D8PSK, 8PSK, 8PSK EDGE, 16QAM, 32QAM, 64QAM, 256QAM, 1024QAM |
| I/Q modulator bandwidth | internal | 60 MHz, 120 MHz or 160 MHz, depending on baseband option |
| external | >500 MHz | |
| Maximum waveform length | 32 Msample | |
| with R&S®SMBV-K511 option | 256 Msample | |
| with R&S®SMBV-K512 option | 1 Gsample | |
| DAC resolution | ||
| ACLR | WCDMA 3GPP FDD, TM 1/64 | 69 dBc (typ.) |
| EVM | WCDMA 3GPP FDD, TM 1/64 | 0.4 % (meas.) |
| WLAN IEEE 802.11 ac, 160 MHz | 0.44 % (meas.) | |
| EUTRA/LTE | 0.4 % (meas.) |
| Connectivity | |
| Remote control | IEC/IEEE, Ethernet (LAN), USB |
| Peripherals | USB 2.0 |
2) PEP = peak envelope power.
3) HD RadioTM is a proprietary trademark of iBiquity Digital Corp.
Lưu ý: Nếu một thiết bị nào đó không được liệt kê ở đây, điều đó không có nghĩa rằng chúng tôi không hỗ trợ được bạn về thiết bị đó. Hãy liên hệ với chúng tôi để biết danh sách đầy đủ về thiết bị mà chúng tôi có thể hỗ trợ và cung cấp.
INO: Bán, Báo giá, tư vấn mua sắm và cung cấp, tư vấn sản phẩm thay thế; tương đương, hướng dẫn sử dụng, giá…VNĐ, …USD info@ino.com.vn | Tel: (+84) 028 73000184 | Rohde-schwarz- Vector Signal Generator (Model:R&S®SMBV100A).
… [Trackback]
[…] Find More on that Topic: ino.com.vn/khac-do-luong-kiem-tra/rohde-schwarz-vector-signal-generator-modelrssmbv100a/ […]
… [Trackback]
[…] Info to that Topic: ino.com.vn/khac-do-luong-kiem-tra/rohde-schwarz-vector-signal-generator-modelrssmbv100a/ […]